Forged Mo Electrode for Glass Electric Melting Kiln

• Customization: Available
• Application: Electronics, Industrial, Chemical
• Standard: JIS, GB, DIN, BS, ASTM
• Model NO.: Molybdenum electrode
• Alloy: Non-alloy
• Type: Molybdenum Electrode
• Powder: Not Powder
• Diameter: 16-20 mm
• Length: 30-1000 mm
• Density for Sintered Products: Over 9.8 g/cm3
• Hardness for Sintered Products (Hra): Over 47
• Transport Package: Wooden Case
• Specification: 16-20 mm
• Trademark: HUONA
• Origin: Shanghai, China
• HS Code: 81029900
• Production Capacity: 200 Tons/Month

Product Description

Forged Mo electrode for Glass Electric Melting Kiln

Molybdenum electrode has high high-temperature strength, good high-temperature oxidation resistance, and long service life. Based on these advantages, it is usually used in daily glass, optical glass, insulation materials, glass fiber, rare earth industry and other fields.
The main component of the molybdenum electrode is molybdenum, which is made by powder metallurgy. The internationally accepted molybdenum electrode has a composition content of 99.95% and a density greater than 10.15g/cm3 to ensure the quality of the glass and the service life of the electrode. Commonly used molybdenum electrodes range in diameter from 20mm to 152.4mm, and the length of a single wire can reach 1500mm.
Using molybdenum electrodes to replace the original heavy oil and gas energy sources can effectively reduce environmental pollution and provide glass quality.
1.Specification:

Diameter,mm	Length,mm	Application
Φ(16~20)	300~1000	Glass melting, Rare earth, metallurgy
Φ(20~30)	250~1000
Φ(30~45)	200~1500
Φ(45~60)	250~2100
Φ(60~100)	250~1200

 
2.Chemical Composition:
 

(Chemical Composition)	Mo Content (%)≥	Other elements (%) ≤
		Al	Ca	Cr	Cu	Fe	Pb	Mg	Mn	Ni	Si	Sn	Ti
content	99.95	0.0020	0.0030	0.0050	0.0010	0.0060	0.0020	0.0010	0.0010	0.0030	0.0030	0.0030	0.0020

 
3.Density:
Density for sintered products: ≥9.8 g/cm3  ;
Density for Press working products: ≥9.9 g/cm3
4.Surface condition:
Silver grey metallic luster .No
5.Hardness:
Hardness for sintered products (HRA) : ≥47
Hardness for Press working products(HRA): ≥50
6.Packing: In Wooden box wrapped with waterproof paper and firmed with packing material  .
7.Standard: GB/T 17792-2014.
8.Your Special requests available .