| Customization: | Available |
|---|---|
| Application: | Aviation, Electronics |
| Standard: | GB, DIN, ASTM, AISI |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High quality 0.005mm thickness Evanohm foil for metal film resistors
1. Evanohm alloy
Evanohm alloy is made up of copper, nickel, Aluminum and chromium as the main components. The resistivity is 2~3 times higher thanmanganin.
It has lower temperature coefficient of resistance(TCR), lower thermal EMF versus copper, good permanence of resistance for a long period of time
and strong antioxidation. Its working temperature range is wider than manganin (-60~300ºC).
It is suitable for making fine precision resistance elements and strain.
2. Evanohm size
Wire: 0.01mm-10mm
Ribbon: 0.05*0.2mm-2.0*6.0mm
Strip: 0.5*5.0mm-5.0*250mm
3.Karma Property
| name | code |
Main Composition (%) |
Standard
|
|||
| Cr | Al | Cu | Ni | |||
| Evanohm | 6J23 |
19~21 |
2.7~3.2 |
2.0~3.0 |
bal. |
JB/T 5328 |
| Name | Code |
(20ºC) vity |
(20ºC) Of Resistance |
(0~100ºC) EMF vs. Copper |
Max.workin g |
(%) on |
(N/mm2) Tensile Strength |
Standard |
| Evanohm | 6J23 | 1.33±0.07 | ≤±20 | ≤2.5 | ≤300 | >7 | ≥780 | JB/T 5328 |
4. Distinctive features of Evanohm resistance wire
1) Starting with Nickel Chromium electric heat wire Class 1, we replaced some of the Ni with
Al and other elements, and thus achieved a precision resistance material with improved
resistance temperature coefficient and heat electromotive force against copper.
With the addition of Al, we have succeeded in making volume resistivity 1.2 times greater
than Nickel Chromium electric heat wire Class 1 and the tensile strength 1.3 times greater.
2) The secondary temperature coefficient β of Evanohm alloy wire KMW is very small, - 0.03 × 10-6/ K2,
and the resistance temperature curve turns out to be almost a straight line within a wide
temperature range.
Therefore, the temperature coefficient is set to be the average temperature coefficient between
23 ~ 53 °C, but 1 × 10-6/K, the average temperature coefficient between 0 ~ 100 °C, also may
be adopted for the temperature coefficient.
3) Electromotive force against copper between 1 ~ 100 °C is also small, below + 2 μV/K, and
exhibits excellent stability over a period of many years.
4) If this is to be used as a precision resistance material, low temperature heat treatment is
required to eliminate processing distortions just as in the case of Manganin wire CMW.
){kind=link}