Aluminum Soft Magnetic Alloy Strip 1j06 All Standards
Department of iron and aluminum alloy is aluminum containing 6% ~ 16%, the allowance is iron, has the high resistivity, low density and high hardness of the soft magnetic alloys.Department alloy suitable for special environment (such as radiation, shock, acceleration, etc.) under the conditions of use, and corrosion resistance and oxidation resistance are better than iron nickel soft magnetic alloy and silicon steel, therefore, in aviation, spaceflight, navigation, etc on the military industry and civilian industry won a wide application.
In the production of iron and aluminum is soft magnetic alloy have 1 j16 and j13, 1 j12, 1 j6 four grades
Resistivity of department of iron and aluminum alloy increases with the increase of the content of aluminum, aluminum when the mass fraction of 16%, reach high resistivity, and the saturated magnetic induction intensity decreased with increasing of aluminium content.Alloy aluminum content score above 12%, made harder and more brittle than less plastic.Department of iron and aluminum alloy compared with the same type of iron nickel alloy, its magnetic can lower.
1j6 Chemical composition
| brand |
C |
P |
S |
Mn |
Si |
Al |
Fe |
| ≤ |
| 1j6 |
0.04 |
0.015 |
0.015 |
0.1 |
0.15 |
5.5~6.5 |
Bal |
features
1 j6 alloys have high saturation magnetic induction intensity, suitable for working under high magnetic field.
1 j6 alloy magnetic than silicon steel sheet is poor, but the outstanding characteristic of the alloy is corrosion resistant performance is good, suitable for doing micromotor, solenoid valve, and part of the power transformer core.Due to the alloy high resistivity, but a significant reduction in the temperature rise, while doing solenoid valve to add the lubricating oil is used to dry or air piping and in ammonia and freon refrigeration medium.
Chemical and physical properties
| Density (g/cm3) |
7.2 |
| Electrical resistivity at 20ºC(Om*mm2/m) |
0.7 |
| Coefficient of linear expansion(20ºC~200ºC)X10-6/ºC |
- |
| Saturation magnetostriction coefficient λθ/ 10-6 |
- |
| Curie point Tc/ ºC |
730 |
FAQ
1. What's the minimum quantity customer can order?
If we have your size in stock, we can provide any quantity you want.
If we do not have, for spool wire, we can produce 1 spool, about 2-3kg. For coil wire, 25kg.
2. How can you pay for small sample amount?
We have Western union account, wire transfer for sample amount also ok.
3. Customer do not have express account. How will us arrange the delivery for sample order?
Just need to provide your address information, we will check the express cost, you can arrange the express cost together with sample value.
4. What's our payment terms?
We can accept LC T/T payment terms, it also depending on delivery and total amount. Let's talk more in details after getting your detailed requirements.
5. Do you provide free samples?
If you want several meters and we have stock of your size, we can provide, customer need to bear the International express cost.
6. What's our working time?
We will give you reply through email/phone Online contact tool within 24 hours. No matter working day or holidays.
Audited Supplier 
){kind=link}